한국어
TE-2000
Always the best spot, through continuous product development
, we hope to keep.
TE-2000
- MODEL NAME
- TE-2000
- Detail information
-
Rated Voltage(Input) : 1-Phase AC 220 V, 3-Phase AC 220V
Max Output Volatage : 3-Phase AC 220V
PLC Link Control Functions
(FAULT,Close end,Open end,UP,DOWN Operation status output)
Air curtain control function(A2,A1,A0)
Application of inverter-only microprocessor
Control value setting and operation status checking by applying LCD module
Positioning: Limit Switch, Rotary Encoder
Exterior box painting: fire preparation, rust-proof spray painting
Outdoor installation capability: Application of waterproof rubber
Separate main board from input terminal for easy A/S
I/O : UP,DOWN,STOP,ONE,HALF,24V,SS,LS,IT-IN,IT-O,EMG,BK1,BK2,ARM1,ARM2
Application of Control : High Speed Automatic Door, Other 3 Phase AC Motor ※ Model-specific features may be changed.
| Category | Specification | |||
|---|---|---|---|---|
| ~ 2HP | ~ 3HP | ~ 5HP | ||
| Rated Output | Motor Capacity | ~1.5KW | ~2.2KW | ~3.75KW |
| Rated Output | ~ 1.5KVA | ~ 2.2KVA | ~ 5KVA | |
| Rated Output Current | 7A | 12A | 16A | |
| Rated Output Valtage | AC 3-Phase 220V | |||
| Power | Voltage/Frequency | 1-Phase / 3-Phase AC 200~ 230V,50/60㎐ | ||
| Allowable voltage variation | Less than 10% of the input voltage | |||
| Allowable frequency variation | Less than ± 5% of the input frequency | |||
| Control | Control method | V/F Control | ||
| Carrier Frequency | 10 KHz | |||
| Frequency setting range | 10 ~ 80㎐ | |||
| Braking | Dynamic braking(if necessary) | |||
| Operatione MODE | Automatic / Manual | |||
| Protective function | Over Current | Trip at more than 170% of rated current | ||
| Over Load | Power stop if rated current is maintained for 2 seconds or more than 150% of the current | |||
| Over Voltage | Trip if over 140% of DC Link | |||
| Under Voltage | Trip if under 50% of DC Link | |||
| Over Temperature | Trip at 85 to 95 [°C] or higher | |||
| Positioning Sensor | If ENCODER Sensor input is not present for 1 second, output stop / LIMIT Sensor input is not present for 10 seconds, output stop |
|||
| Setting function | Maximum output frequency | 30 ~ 80㎐, Default : 60㎐ | ||
| Accelation Time | 0.4 ~ 1.0sec, Default : 0.8sec | |||
| Decelation Time | 0.2 ~ 1.0sec, Default : 0.4sec | |||
| STOP FREQUENCY | 10~30 Hz | |||
| RATED VOLTAGE | V/F 50~100% | |||
| INTERLOCK | Selection ON/OFF | |||
| Wait time to Open end | 1~250sec, Default : 5sec | |||